Top Troubleshooting Tips for Air Compressor




 

Air compressor is one of the most crucial assets for any business. However, it is an extensively complex machine and prone to break down often. The breakdown of the air compressor can cause the stoppage of processes in an enterprise. Quick repair tricks can help in this situation. You also can rely on the reputed professionals for compressor repair in Sherman Oaks, CA. However, knowing how to troubleshoot the air compressor can help when it stops working. Further in this blog, we’ll be discussing the best troubleshooting tips for air compressors so make sure to till the end.

Excessive noise

When the compressor is working more loudly than usual, there could be some reason behind this like a loose pulley, flywheel, belt, cooler, or any other accessories. So tightening them can help. You can also add oil to the crankcase or check for any bearing damage.

Not enough pressure

There could be a leak in the compressor line so it is crucial to look for any leaks or blockage along with the hose or piping. In case you find something, you can easily repair it. The air filter also needs to be cleaned or replace to facilitate airflow and pressure. There are many ways that you can use to reduce the pressure drop in the system.

Air blowing out of the inlet valve

One cause of air blowing out of the inlet valve there could be a broken inlet valve. In this situation, the valve assembly will need to be replaced.

Excessive belt wear

There can be many reasons for excessive belt wear. The pulley could be out of alignment and it needs to be aligned with the compressor flywheel. In case, if the belt is too loose or too tight, the tension should also be balanced. If you find a wobble, check for a warm crankshaft, keyway or pulley bore. These things can be the result of running with loose pulleys.

Fuses blow excessively

You can easily solve this issue by simply checking if the fuses are of proper ampere and rating for use. There may also be low voltage to the system or a defective unloader. You can get it repaired by the compressor repair professionals or replace it.

Excess oil consumption

Many issues can contribute to increased oil usage. There can be restricted air which can be resolved by cleaning or replacing the air filter. If an oil leak is a reason then tightening bolts and replacing the gasket can help. It could also be the piston ring that needs to be replaced. If you have used the wrong oil viscosity, you need to drain the oil and then refill it with the perfect viscosity.

The compressor isn’t working

It can just be because of the power loss. You can plug the compressor into any other power source. A bad unloader valve can also be the culprit. So you can try replacing it.

Contact the professionals when nothing works

Sometimes the replacing and tightening will not solve the issues. If you have done what you can to troubleshoot the compressor and the issues persist, contact the professionals for compressor repair in Sherman Oaks, CA. 

Comments

Popular posts from this blog

5 Best Practices To Improve Your Refrigerator’s Energy-Efficiency

5 major Red Flags Your Refrigerator Is Broken

5 Common Issues Why Your Dishwasher is So Loud